DIY Mono Dual Buffer & Tuner Out Pedalboard Interface | vertexeffects.com

DIY Mono Dual Buffer & Tuner Out Pedalboard Interface

MONDAY, NOVEMBER 9, 2020

DIY Mono Dual Buffer + Tuner Out Pedalboard Interface
 
The diagrams, templates, and materials listed correspond to this video (shown below), where I show all DIYers how to
build a Pedalboard Buffer Interface system just like the pros!  All of the info you'll need to design your own
customized buffer with options for mono, stereo, wet/dry, split mono, effects loops or 4 cable method, audition
loops, tuner outs, and more are all available as you scroll down the page.
 
 


MONO DUAL BUFFER WITH TUNER OUT
The Mono Dual Buffer is ideal for any MONO pedalboard system running in front of an amplifier.
The Tuner Out provides a buffered feed to your tuner, and allows you to remove the tuner from
your signal path while still getting a direct feed from your input.  This could also be used as a
direct out or clean (unaffected) output for re-amping.
 
Application Example, Block Diagram
 
Drilling Template (Hammond 1590B Enclosure)
Download Diagram Here *Print at 100% Scale*
 
Wiring Diagram (shown from inside enclosure)
 
Bill of Materials:
1x Hammond 1590B Enclosure: 
2x Creation Audio Labs Buffer PCB (select 1 Meg Ohm, Nylon ISO Jack, Unity Gain): 
2x Neutrik NRJ6HF 1/4" TRS Jack(s): 
2x Neutrik NRJ 1/4" Nut(s): 
1x Switchcraft Tip Shunt 1/4" Jack(s): 
1x DC Power Jack: 
3x Keystone Hole Plugs: 
1x Hook Up Wire: